• THETA Electric Spindle
  • Electric (built-in) multi-axis milling and multi-axis milling and turning spindles
  • Engraving spindle (ATC)
  • Milling/grinding spindle (ATC)
  • Milling/grinding ATC spindle (equipped with FANUC BUILT-IN SPINDLE MOTOR)
  • Grinding spindle (manual tool change)
  • Dressing spindle
• Traditional spindle
  • Milling spindle
  • Grinding spindle
  • Turning spindle
• Matching around the spindle
  • Coolant additives
  • Oil and Gas Lubricant
  • Oil and gas system
  • Rust Remover
  • Clamping force gauge
  • Tool ejection path instrument
  • Standard test strip
• STOBER reducer
  • Two-speed gearbox
  • Gear rack and pinion drive
  • Planetary reducer
• SESAME reducer
  • Planetary reducer-shaft output
  • Planetary reducer right angle type
  • Planetary reducer-flange output
• Rongcheng (WinsΛn) Permanent Magnet Electric Spindle
  • Grinding machine electric spindle
  • Swing axis
  • Dressing the electric spindle

BT-30 Clamping force gauge

Drawing download

Add to inquiry

Send inquiry form

Return

Specifications

【BT-30 / 40/50 Clamping Force Gauge 】

※ Features: Hydraulic machinery

Structure, high stability

※ Instruction

1. Confirm that the pull pin of the clamping force gauge matches the spindle fixture.

2. Clean the spindle taper and clamping force gauge before holding.

3. The       measurement range is as follows:

Conversion : 1  kg/cm² = 10kg = 100 N

Reference clamping force range :

　　　BT-30  : 200~500kg

　　　BT-40  : 500~1100kg

　　　BT-50  : 1500~2200kg

In order to ensure the accuracy of the measured value, the clamping force gauge should be used under pre-tension. Please check the photos to see how to adjust.